Max depth of drilling machine :1600mm

CNC Deep hole drilling machine TL2016 ,

Specification

Model TL-600 TL-800 TL-1100 TL-1600 TL-2016 TL-2200 TL-3200
 Number of drill spindle Uniaxial Uniaxial Uniaxial Uniaxial Uniaxial Uniaxial Uniaxial
 Inner diameter of drilling mm 2.0-25 2.5-30 2.5-35 2.5-40 2.5-40 2.5-42 3-45
 Directional maximum depth of drilling mm 600 800 1200 1600 1650 2200 2200
 Size of working table mm 800*600 900*700 1250*950 1800*1100 2200*1350 2200*1350 2800*1700
 Displacement of X-axis mm 800 800 1100 1600 2200 2200 3200
 Displacement of Y-axis mm 600 600 1050 1100 1100 1450 1550
 Displacement of Z-axis mm 620 900 1200 1650 1650 2200 2200
 Drilling cutting feed rate mm/min 10-250 10-250 10-250 10-250 10-250 10-250 10-250
 Maximum rotaring speed of principal
axis
rpm 7000 7000 7000 7000 7000 7000 7000
 Principal axis motor KW (Servo) 5.5-7.5 (Servo) 7.5 (Servo) 7.5-11 (Servo) 11-15 (Servo) 11-15 (Servo) 11-15 (Servo) 15-20
 Moving the motor from right to left on
work table (X)
KW (Servo) 2.0 (Servo) 2.0 (Servo) 3.0 (Servo) 3.0 (Servo) 4.4 (Servo) 5.0 (Servo) 5.5
 Moving the motor from up to down on
principal axis (Y)
KW (Servo) 1.5 (Servo) 2.0 (Servo) 2.0 (Servo) 3.0 (Servo) 3.0 (Servo) 3.0 (Servo) 3.0
 Moving the motor from front to back on
principal axis (Z)
KW (Servo) 1.5 (Servo) 1.5 (Servo) 1.5 (Servo) 2.0 (Servo) 2.0 (Servo) 2.0 (Servo) 2.0
 Pressure of cutting pressure pump kgf/c㎡ 80 80 80 80 80 80 80
 Oil mass of oil pressure pump litre/min 6-60 6-60 6-60 6-60 6-60 6-60 6-60
 Capacity of cutting oil tank litre 600 600 700 800 800 800 800
 Load capacity of working table kg 4000 5000 6000 10000 12000 12000 15000
 Machine net weight kg 4800 6500 9500 13000 14000 16800 22000
 Machine power KW 20 23 26 30 33 35 45
 Machine size (L*W*H) mm 4700*3300*2200 4700*3300*2200 5100*3600*2700 5700*4100*2800 6000*5500*3000 6900*5500*3200 7100*7100*3300